Sunday, March 25, 2012

Devinci Atlas Build | My New Ride!


The new Devinci Altas 29er w/ Fox RP 23 Kashima. Built with my slightly worn XTR Dynasys 3x10 kit, DT Swiss 240's (that easily converted to 142mm x 12mm rear axle) laced to Stan's Arch Rims, ENVE bars, Thomson stem and seatpost, and some new Ergon contact points. The Fox fork shown is temporary... Made in Canada. Assembled in Colorado. Total weight comes in at 26.8 lbs.

Complete Devinci Atlas 29er; 26lbs 8oz

Asymmetrical Chainstays
Click here for more photos....




Brake side interior of Split Pivot/ 12mm axle

Made in Canada

G04 T-6066 Aluminum

Full Response Geometry (Adjustable; see next pic)

'FRG'- flip the eccentric chip to steepen the seat tube and head tube angles

stacks o' dimes
Pressfit BB92 Bottom Bracket (is that redundant?)

Thomson/ ENVE

Ergon SM3 Pro Saddle (Sample: labeled as Pro Carbon)

RP23 w/ Kashima, boost valve...blah blah blah...

Slightly worn XTR Dynasys Drivetrain

Rubena Kratos Top Design Tubeless mounted on Stans Arch Rims

Drive Side Split Pivot and dropout
Brake Side Split Pivot, XTR Trail Pads, 180mm rotors
White Ergon GS1 Grips




No comments:

Post a Comment